CDC2582

Mfr. #:: CDC2582
Manufacturer:: Texas Instruments
Description:
Lifecycle:: New from this manufacturer.
Datasheet:: CDC2582 Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Product Attribute
Attribute Value

Manufacturer: Texas Instruments

Product Category: Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers

Series: CDC2582

Type: PLL Clock Driver

Packaging: Tray Alternate Packaging

Unit-Weight: 0.009111 oz

Mounting-Style: SMD/SMT

Package-Case: TQFP-52

Operating-Temperature: 0°C ~ 70°C

Mounting-Type: Surface Mount

Voltage-Supply: 3 V ~ 3.6 V

Supplier-Device-Package: 52-TQFP (10x10)

PLL: Yes with Bypass

Input: LVPECL

Output: LVTTL

Number-of-Circuits: 1

Ratio-Input:Output: 1899/12/30 1:12:00

Differential-Input:Output: Yes/No

Frequency-Max: 100MHz

Divider-Multiplier: Yes/Yes

Maximum-Operating-Temperature: + 70 C

Minimum-Operating-Temperature: 0 C

Supply-Voltage-Max: 3.6 V

Supply-Voltage-Min: 3 V

Tags: CDC2582, CDC258, CDC25, CDC2, CDC

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

CDC2582 Description

***th Star Micro: the cdc2582 is a high-performance low-skew low-jitter clock driver. it uses a phase-lock loop (pll) to precisely align the frequency and phase of the clock output signals to the differential lvpecl clock (clkin ) input signals. it is specifically designed to operate at speeds from 50 mhz to 100 mhz or down to 25 mhz on outputs configured as half-frequency outputs. each output has an internal 26- series resistor that improves the signal integrity at the load. the cdc2582 operates at 3.3-v vcc. the feedback input (fbin) synchronizes the frequency of the output clocks with the input clock (clkin ) signals. one of the twelve output clocks must be fed back to fbin for the pll to maintain synchronization between the differential clkin and inputs and the outputs. view all in datasheet

***as Instruments: The CDC2582 is a high-performance, low-skew, low-jitter clock driver. It uses a phase-lock loop (PLL) to precisely align the frequency and phase of the clock output signals to the differential LVPECL clock (CLKIN, ) input signals. It is specifically designed to operate at speeds from 50 MHz to 100 MHz or down to 25 MHz on outputs configured as half-frequency outputs. Each output has an internal 26- series resistor that improves the signal integrity at the load. The CDC2582 operates at 3.3-V VCC. The feedback input (FBIN) synchronizes the frequency of the output clocks with the input clock (CLKIN, ) signals. One of the twelve output clocks must be fed back to FBIN for the PLL to maintain synchronization between the differential CLKIN and inputs and the outputs. The output used as feedback is synchronized to the same frequency as the clock (CLKIN and ) inputs. The Y outputs can be configured to switch in phase and at the same frequency as differential clock inputs (CLKIN and ). Select (SEL1, SEL0) inputs configure up to nine Y outputs, in banks of three, to operate at one-half or double the differential clock input frequency, depending upon the feedback configuration (see Tables 1 and 2). All output signal duty cycles are adjusted to 50% independent of the duty cycle at the input clocks. Output-enable () is provided for output control. When is high, the outputs are in the low state. When is low, the outputs are active. is negative-edge triggered and can be used to reset the outputs operating at half frequency. TEST is used for factory testing of the device and can be used to bypass the PLL. TEST should be strapped to GND for normal operation. Unlike many products containing a PLL, the CDC2582 does not require external RC networks. The loop filter for the PLL is included on chip, minimizing component count, board space, and cost. Because it is based on PLL circuitry, the CDC2582 requires a stabilization time to achieve phase lock of the feedback signal to the reference signal. This stabilization time is required following power up and application of a fixed-frequency, fixed-phase signal at CLKIN and , as well as following any changes to the PLL reference or feedback signal. Such changes occur upon change of SEL1 and SEL0, enabling the PLL via TEST, and upon enable of all outputs via . The CDC2582 is characterized for operation from 0°C to 70°C. detailed description of output configurations The voltage-controlled oscillator (VCO) used in the CDC2582 has a frequency range of 100 MHz to 200 MHz, twice the operating frequency range of the CDC2582 outputs. The output of the VCO is divided by 2 and by 4 to provide reference frequencies with a 50% duty cycle of one-half and one-fourth the VCO frequency. SEL0 and SEL1 determine which of the two signals are buffered to each bank of device outputs. One device output must be externally wired to FBIN to complete the PLL. The VCO operates such that the frequency of this output matches that of the CLKIN/ signals. In the case that a VCO/2 output is wired to FBIN, the VCO must operate at twice the CLKIN/frequency, resulting in device outputs that operate at the same or one-half the CLKIN/ frequency. If a VCO/4 output is wired to FBIN, the device outputs operate at the same or twice the CLKIN/frequency. output configuration A Output configuration A is valid when any output configured as a 1× frequency output in Table 1 is fed back to FBIN. The frequency range for the differential clock input is 50 MHz to 100 MHz when using output configuration A. Outputs configured as 1/2× outputs operate at half the input clock frequency, while outputs configured as 1× outputs operate at the same frequency as the differential clock input. NOTE: n = 1, 2, 3 output configuration B Output configuration B is valid when any output configured as a 1× frequency output in Table 2 is fed back to FBIN. The frequency range for the differential clock inputs is 25 MHz to 50 MHz when using output configuration B. Outputs configured as 1× outputs operate at the input clock frequency, while outputs configured as 2× outputs operate at double the frequency of the differential clock inputs. NOTE: n = 1, 2, 3

Market price

Part #	Mfg.	Description	Stock	Price
CDC2582PAH DISTI # 296-6689-5-ND	Texas Instruments	IC 3.3V PLL CLK-DRVR 52-TQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
CDC2582PAHG4 DISTI # CDC2582PAHG4-ND	Texas Instruments	IC 3.3V PLL CLK-DRVR 52-TQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
CDC2582PAH DISTI # 595-CDC2582PAH	Texas Instruments	Clock Drivers & Distribution 3.3V PLL Clock Drvr RoHS: Compliant	0
CDC2582PAHG4 DISTI # 595-CDC2582PAHG4	Texas Instruments	Clock Drivers & Distribution 3.3V PLL Clock Drvr RoHS: Compliant	0
CDC2582PAH	Texas Instruments	PLL Based Clock Driver, CDC Series, 12 True Output(s), 0 Inverted Output(s), BICMOS, PQFP52 RoHS: Compliant	15198	1000:$7.9500 500:$8.3700 100:$8.7100 25:$9.0800 1:$9.7800
CDC2582PAH	Texas Instruments		1734
CDC2582PAH	Texas Instruments	INSTOCK	67

Image	Part #	Description
	Mfr.#: CDCVF2509APW OMO.#: OMO-CDCVF2509APW	Clock Drivers & Distribution 3.3V Ph-Lock Look Clock Driver
	Mfr.#: CDCV855PWR OMO.#: OMO-CDCV855PWR	Clock Drivers & Distribution 1:4 DDR PLL CLOCK DRIVERS
	Mfr.#: CDCV850IDGGG4 OMO.#: OMO-CDCV850IDGGG4	Clock Drivers & Distribution 2.5V Ph Lock Loop Diff Clock Driver
	Mfr.#: CDC328DB OMO.#: OMO-CDC328DB-1190	- Bulk (Alt: CDC328DB)
	Mfr.#: CDC421312RGER OMO.#: OMO-CDC421312RGER-TEXAS-INSTRUMENTS	IC CLK GENERATOR 312.50MHZ 24QFN
	Mfr.#: CDCE906 OMO.#: OMO-CDCE906-1190	New and Original
	Mfr.#: CDCKV2310PWR OMO.#: OMO-CDCKV2310PWR-1190	New and Original
	Mfr.#: CDC2351QDBRG4 OMO.#: OMO-CDC2351QDBRG4-TEXAS-INSTRUMENTS	IC CLK BUFFER 1:10 100MHZ 24SSOP
	Mfr.#: CDC337DWG4 OMO.#: OMO-CDC337DWG4-TEXAS-INSTRUMENTS	IC CLK BUFFER 1:8 80MHZ 20SOIC
	Mfr.#: CDC5D23BNP-5R6MC-CUT TAPE OMO.#: OMO-CDC5D23BNP-5R6MC-CUT-TAPE-1190	New and Original

CDC2582

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes